Asm G1x

dwl · 04/26/2007, 07:17 PM

Hi,
I just bought an ASM G1X. It came with absolutely NO instructions.
Can anyone help me out and tell me how deep the water should be in the sump I put it in?
Any input as to how to adjust it would be great too.

Thanks.

dwl · 04/27/2007, 03:12 PM

Well, apparently this is the wrong question, or just not a popular skimmer...

Can anyone point me to where I might be able to get some help getting this thing set up?

Thanks.

collins · 04/28/2007, 03:13 PM

I used to have one and it ran well in 8" of water.

Pull up the riser tube until the foam is half way up the neck.

dwl · 04/28/2007, 08:42 PM

collins
Thanks for the input, I thought this would just die a slow death.

One (embarrassing) thing that will tell you I am a newbie, what and where is the riser tube?

Thanks.

Joshua1023 · 04/28/2007, 09:53 PM

http://reefcentral.com/forums/showth...5&pagenumber=1

I don't have one, but the folks on this thread should have all the info you could possibly want.

collins · 04/29/2007, 04:34 AM

You're welcome.

The riser tube is the grey tube on the side of the unit. It has a foam cover. You will need to adjust the height from time to time, but it is pretty much set and forget.

I was pretty happy with it and didn't modify it at all. You just have to make sure to give it a vinegar bath every month or so.

good luck

04/26/2007, 07:17 PM	#1
dwl Registered Member Join Date: Apr 2007 Location: mission viejo Posts: 524	Asm G1x Hi, I just bought an ASM G1X. It came with absolutely NO instructions. Can anyone help me out and tell me how deep the water should be in the sump I put it in? Any input as to how to adjust it would be great too. Thanks.

04/28/2007, 09:53 PM	#5
Joshua1023 Registered Member Join Date: Oct 2006 Location: Reading PA Posts: 1,526	http://reefcentral.com/forums/showth...5&pagenumber=1 I don't have one, but the folks on this thread should have all the info you could possibly want. __________________ Only bad things happen fast. Only bad thing happen fast. Only bad things happen fast. Man,I'm friggen hard-headed!!! Current Tank Info: 90 gl tank,Coralife 14K MH lights,2 Current dual daylight/actinic 40 watt fixtures, tidepool sump,Coralife SS 220 protein skimmer,six inch sand bed w/ plenum, Current Prime Tower 1/3 hp Chiller,RedSea ozonizer w/ orp

04/27/2007, 03:12 PM	#2
dwl Registered Member Join Date: Apr 2007 Location: mission viejo Posts: 524	Well, apparently this is the wrong question, or just not a popular skimmer... Can anyone point me to where I might be able to get some help getting this thing set up? Thanks.

04/28/2007, 03:13 PM	#3
collins Registered Member Join Date: Dec 2004 Location: Alberta, Canada Posts: 409	I used to have one and it ran well in 8" of water. Pull up the riser tube until the foam is half way up the neck.

04/28/2007, 08:42 PM	#4
dwl Registered Member Join Date: Apr 2007 Location: mission viejo Posts: 524	collins Thanks for the input, I thought this would just die a slow death. One (embarrassing) thing that will tell you I am a newbie, what and where is the riser tube? Thanks.

04/29/2007, 04:34 AM	#6
collins Registered Member Join Date: Dec 2004 Location: Alberta, Canada Posts: 409	You're welcome. The riser tube is the grey tube on the side of the unit. It has a foam cover. You will need to adjust the height from time to time, but it is pretty much set and forget. I was pretty happy with it and didn't modify it at all. You just have to make sure to give it a vinegar bath every month or so. good luck