![]() |
![]() |
![]() |
#1 |
Registered Member
Join Date: Feb 2006
Posts: 137
|
No Sump
Can I have a successful 60g reef tank without a sump?
|
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Nov 2005
Location: Granada Hills
Posts: 4,376
|
yes
|
![]() |
![]() |
![]() |
#3 |
Premium Member
![]() Join Date: Sep 2003
Location: Corvallis, OR
Posts: 3,802
|
why cant you run a sump?
__________________
Get your facts first, then you can distort them as you please. Mark Twain Current Tank Info: 93g Marineland cube. SPS dominated. Vortech mp40. 2 x AI sol super blues. SRO 2000 int skimmer. Mag 18 return. Korallin 1500 calcium reactor. |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Dec 2005
Location: Virginia Beach, Virginia
Posts: 99
|
Sure
|
![]() |
![]() |
![]() |
#5 | |
Registered Member
Join Date: Feb 2006
Posts: 137
|
Quote:
|
|
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Feb 2002
Location: Idaho
Posts: 2,882
|
I've run a tank both ways and would never run without a sump again if at all possible. IMHO, the benefits of additional volume, places to put heaters, pumps, skimmers, etc. make it worth learning some plumbing...
|
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: Apr 2005
Location: Mid coast, Hope, Maine
Posts: 861
|
hang on refuigum may help... some benefits above without the worry of a sump...
__________________
drew Current Tank Info: 46 gallon bowfront, t5 ho 4 x 39 tek fixture, turboflotor 1000 multi, hob refugium |
![]() |
![]() |
![]() |
#8 | |
Registered Member
Join Date: Feb 2006
Posts: 137
|
Quote:
|
|
![]() |
![]() |
![]() |
#9 |
Registered Member
Join Date: Feb 2003
Location: Chico, CA
Posts: 491
|
If it were me, I'd go with the sump instead of the refugium.
Really I can't think of any benefit the refugium offers (well, aside from maybe macroalgae/pod growth). IMO, a refugium and sump are two different beasts, and trying to gain the benefits of a sump by adding a refugium are kinda questionable. You 'may' be able to fit a heater in a refugium, but that would be about it... you can't fit a skimmer in it, and it adds a negligible amount of volume (maybe a gallon). I agree that running a sump is the way to go... it doesn't add much to the overall cost of your tank, yet it's benefits are hard to estimate... it depends on whether or not you like seeing all of your tank equipment inside your tank, or if you'd rather get them out of sight so you can enjoy your reef. Also, PVC plumbing is a piece of cake... and it's also cheap, so if you mess it up, just go buy more... you'll only be out a few bucks, but you'll have gained experience... ya know, that thing you always get just after you really needed it. ![]()
__________________
David Current Tank Info: 125g 3/4" Acrylic Cube (36"x36"x24") - 312w T5HO - 250w 10K XDE HQI PFO - Mag 18 return, 6 MJ-1200 • Downsizing to a 24g Nano! Ain't life strange? |
![]() |
![]() |
![]() |
#10 |
Registered Member
Join Date: Apr 2005
Location: Mid coast, Hope, Maine
Posts: 861
|
well.... 10 grand in hard wood floors will make you think twice about sump... Never have talked to anyone that hasn't had or heard a horror story...
Refugiums are also completely silent and add about 4 to 5 gallons to the water volume if you go with normal name brand product. Heaters and most hang on products fit in them. However big old sump with lots of volume is the best. Running one into basement where you can make a mess and workon things-- thats what you really want.
__________________
drew Current Tank Info: 46 gallon bowfront, t5 ho 4 x 39 tek fixture, turboflotor 1000 multi, hob refugium |
![]() |
![]() |
![]() |
#11 |
Registered Member
Join Date: Feb 2006
Posts: 137
|
okay--well I also dont want a mess. So tell me more about the HOB ref.
|
![]() |
![]() |
![]() |
#12 |
Registered Member
Join Date: Sep 2004
Location: Orlando, FL
Posts: 112
|
I am running my 40g compelety HOB right now but i still wish i had my sump. Much easier access to everything and the ability to hide everything. If you do go with a sump, make sure to have your tank drilled.
__________________
"The sea, once it casts its spell, holds on in its net of wonder forever." - Jacques Cousteau Current Tank Info: Taking a little Break :P |
![]() |
![]() |
![]() |
#13 | |
Registered Member
Join Date: Feb 2003
Location: Chico, CA
Posts: 491
|
Quote:
Well, you've met your first non-horror-story person with a sump. ![]() I've had sumps on all my tanks and have yet to have any problems... primarily because I designed my systems with plenty of extra overflow capacity, and I've used both HOB and drilled overflows (so there's no difference in that regard). 99% of the stories I've seen have been either from siphons breaking on poorly-designed overflow boxes (i.e. 'CPR' overflows), or people that didn't allow for enough draindown when their tank shuts off (or they didn't keep their siphon-break holes cleaned out on their return lines). Other flood instances can be traced to faulty floats or sticking floatswitches on top-off systems, but then again that would be shoddy maintenance that causes a flood, not necessarily the sump itself. If you keep those three things in mind, sumps are no more dangerous flood-wise than your tank. You have a 5-gallon HOB refugium? Personally, I'd be more worried about having 40lbs. of water hanging on the back glass of my tank (supported by plastic) than I would be with a sump... but of course there's different ways to do everything in this hobby. ![]() Hardwood floors would make me a bit leery too... so I see your point on that one...
__________________
David Current Tank Info: 125g 3/4" Acrylic Cube (36"x36"x24") - 312w T5HO - 250w 10K XDE HQI PFO - Mag 18 return, 6 MJ-1200 • Downsizing to a 24g Nano! Ain't life strange? |
|
![]() |
![]() |
![]() |
#14 |
Registered Member
Join Date: Feb 2002
Location: Idaho
Posts: 2,882
|
The best thing we did for the sump under our old 75g system was to build an acrylic tray that was 5" tall and covered 80% of the stand. The sump and calcium reactor sat in the tray for that extra safety factor. Easy to build and worked great. I highly recommend it!
Here you can see part of the tray, sump, and reactor. -Doug |
![]() |
![]() |
![]() |
|
|