|
|
|
05/24/2007, 06:54 PM
|
#1 |
|
Registered Member
Join Date: Oct 2002
Location: NJ
Posts: 658
|
Found this Eductor... Have some questions
I found 2 BEX chem tank mixing eductors at work during a cooling tower upgrade and I had a few questions.
1) The eductors were used in a brominated system (average levels 1.5-2.5 free chlorine). Will this leach out of the plastic back into my tank? 2) My closed loop will consist of (4) 3/4" nozzles fed off of a OM squirt run by a Gen x 40 pump. The eductors are 1/2'' male npt. How much flow will I lose bushing it down? Will using 2 eductors throw the OM "outta whack"? Are these worth using or should I stick to my original CL plan? Maybe I could use one of them on my return? (3/4'' from a panworld 100) Any opinions greatly appreciated. |
|
|
|
05/24/2007, 07:18 PM
|
#2 |
|
Registered Member
Join Date: Nov 2002
Location: Baton Rouge, LA
Posts: 643
|
If you don't have penductors on every outlet of the ocean motions it will never work. Water will just come out of whatever outlets do not have a penductor on them.
|
|
|
|
|
05/24/2007, 07:20 PM
|
#3 |
|
Registered Member
Join Date: Oct 2002
Location: NJ
Posts: 658
|
How will it come out the other outlets? On an OM squirt only 1 and a half outlets are open (others are covered by the rotating drum) at any given time........
|
|
|
|
 |
|
|
