balsaaaq' 29g build....finally

balsaaaq · 06/25/2007, 06:49 PM

Well I think I have collected 99% of what i need to complete my build.

Tank will be coast to coast overflow into a 5.5 gallon fuge/sump with low return rate. Closed loop will be utilized for return.

Took 3 months for the tank to arrive....and nobody can assure me its not tempered...have to call allglass before i start to drill....i wee bit nervous....

will keep you all updated...bals

snulma1 · 06/25/2007, 07:47 PM

Nice tank! I like the black silicone!

mille239 · 06/25/2007, 07:50 PM

I see bulkheads... I'm glad you're going to have it drilled instead of using over the top U-tubes. The sides will NOT be tempered, rest assured.
What lights/equipment do you plan?

Doahh · 06/25/2007, 07:56 PM

Might want to check this... the exact same tank XD
http://www.youtube.com/watch?v=8uigdnhUsns

reefing102 · 06/25/2007, 08:56 PM

the sides are not tempered but the bottom more than likely is. looking good so far

either way be careful when drilling

Doahh · 06/25/2007, 09:04 PM

But in the movie that was the side... you can never be sure these days. Beter to check with a set of polarized glasses

balsaaaq · 06/26/2007, 10:54 AM

will check with glasses.....and call allglass....as far as the black silicon I am glad I waited...

the cl is a quite one 4000, mag 5 for fuge return, little cheato in the fuge and a sapphire skimmer, for extra measure. lighting will be orbit pc for now, I really choose it for asthetics and will retro fit some t5s in the fixture in 6/8 months....

tring to get the nerve up to drill 6 holes in the tank...

Ewan · 06/26/2007, 01:13 PM

I've got 3 holes on the back of my 29 AGA, and one on the bottom.
Pics of the placement are on the last page of my gallery.

I run a panworld 50px for my closed loop and a panworld 40px for my return (return goes through chiller). I also have a Sieo in there for circulation. Hindsight, I should have bought a couple of controllable streams.

06/25/2007, 06:49 PM	#1
balsaaaq Registered Member Join Date: Feb 2007 Posts: 112	balsaaaq' 29g build....finally Well I think I have collected 99% of what i need to complete my build. Tank will be coast to coast overflow into a 5.5 gallon fuge/sump with low return rate. Closed loop will be utilized for return. Took 3 months for the tank to arrive....and nobody can assure me its not tempered...have to call allglass before i start to drill....i wee bit nervous.... will keep you all updated...bals

06/25/2007, 07:50 PM	#3
mille239 Premium Member Join Date: Nov 2003 Location: Harrison Twp., MI Posts: 1,644	I see bulkheads... I'm glad you're going to have it drilled instead of using over the top U-tubes. The sides will NOT be tempered, rest assured. What lights/equipment do you plan? __________________ -Blair Disclaimer: No trees were harmed in the creation of this post, though a significant number of electrons may have been inconvenienced. Current Tank Info: 120 SPS reef in progress, 120 mixed reef, currently being completely rebuilt)

06/25/2007, 07:56 PM	#4
Doahh Registered Member Join Date: Apr 2007 Location: Loomis CA Posts: 2,398	Might want to check this... the exact same tank XD http://www.youtube.com/watch?v=8uigdnhUsns __________________ -Josh Current Tank Info: 90 Gal Custom SW Reef

06/25/2007, 08:56 PM	#5
reefing102 Who Am I Here? Join Date: Feb 2006 Location: Central Ohio Posts: 1,155	the sides are not tempered but the bottom more than likely is. looking good so far either way be careful when drilling __________________ Shane Life's a climb... but the view is great. ______________________________ Current Tank Info: 2.5 Gallon Nano

06/25/2007, 09:04 PM	#6
Doahh Registered Member Join Date: Apr 2007 Location: Loomis CA Posts: 2,398	But in the movie that was the side... you can never be sure these days. Beter to check with a set of polarized glasses __________________ -Josh Current Tank Info: 90 Gal Custom SW Reef

06/25/2007, 07:47 PM	#2
snulma1 Registered Member Join Date: May 2005 Location: New York, NY Posts: 2,281	Nice tank! I like the black silicone!

06/26/2007, 10:54 AM	#7
balsaaaq Registered Member Join Date: Feb 2007 Posts: 112	will check with glasses.....and call allglass....as far as the black silicon I am glad I waited... the cl is a quite one 4000, mag 5 for fuge return, little cheato in the fuge and a sapphire skimmer, for extra measure. lighting will be orbit pc for now, I really choose it for asthetics and will retro fit some t5s in the fixture in 6/8 months.... tring to get the nerve up to drill 6 holes in the tank...

06/26/2007, 01:13 PM	#8
Ewan Premium Member Join Date: Oct 1999 Location: Fredericton, NB, Canada Posts: 2,594	I've got 3 holes on the back of my 29 AGA, and one on the bottom. Pics of the placement are on the last page of my gallery. I run a panworld 50px for my closed loop and a panworld 40px for my return (return goes through chiller). I also have a Sieo in there for circulation. Hindsight, I should have bought a couple of controllable streams.