|
|
|
01/25/2008, 12:39 PM
|
#1 |
|
Registered Member
Join Date: Nov 2007
Location: CT
Posts: 818
|
Flow setup
ok so i have built my sump, 300 gph will be flowing through it and the same back to the tank. I will also be doing a closed loop after this project is done. I figured another 300 gph pump would be good. (30 gallon tank) My question is, what would be a good setup for the the return line and the closed loop? I mean as far as positioning for outlets and how many outlets on each? I would like to eliminate my power heads with this.
|
|
|
|
01/25/2008, 02:31 PM
|
#2 |
|
Registered Member
Join Date: Jul 2005
Location: Lake Forrest CA
Posts: 1,732
|
Return is generally done on the opposite side as the overflow. For a closed loop I would shoot for prob a 600gal/hr or larger and 4 to 6 outputs. 6/600 will be 100gal/hr out of each nozzle.
|
|
|
|
|
01/27/2008, 07:54 PM
|
#3 |
|
Registered Member
Join Date: Nov 2007
Location: CT
Posts: 818
|
I ordered an SCWD wavemaker for that set up. Would you still recommend the same amount of output with that setup?
|
|
|
|
|
01/28/2008, 10:06 AM
|
#4 |
|
Registered Member
Join Date: Nov 2007
Location: CT
Posts: 818
|
bump bump
|
|
|
|
 |
|
|
