Schuran Jetstream Pico Calcium reactor

dmccoy · 09/13/2009, 04:10 PM

Does anyone have any experience with the Schuran Jetstream Pico Calcium reactor? I picked up a used unit but it did not come with the user's manual. Does anyone have a copy i can borrow or know where i can download a copy? Or even better have the same unit and could possibly guide me in the proper setup.

I have the CO2 tank, regulator and a good needle valve for controlling the bubble count. The unit will be controlled by a RK2 or Milwalkee PH controller.

75 gal tank
30 gal sump
RK2 controller (will use this for tank PH monitoring)
Milwalkee PH controller as well (i will use this for the CA reactor)

I have read a lot about the various CA reactors and I understand the chemisty and the process. My question is mainly concerning the Schuran and the setup process. From what i have read the Schuran CA reactors operate a little different than most units. Based on the reading I am guessing that I should use something like an aqualifter pump to feed the unit.

Anyway, thanks in advance for anyone's assistance!

dmccoy · 09/13/2009, 07:29 PM

Bump

janey · 01/01/2015, 12:06 PM

Hi Did you ever get it going ??
I have the same one and i want to set it up ?

09/13/2009, 04:10 PM	#1
dmccoy Registered Member Join Date: Jul 2009 Posts: 2	Schuran Jetstream Pico Calcium reactor Does anyone have any experience with the Schuran Jetstream Pico Calcium reactor? I picked up a used unit but it did not come with the user's manual. Does anyone have a copy i can borrow or know where i can download a copy? Or even better have the same unit and could possibly guide me in the proper setup. I have the CO2 tank, regulator and a good needle valve for controlling the bubble count. The unit will be controlled by a RK2 or Milwalkee PH controller. 75 gal tank 30 gal sump RK2 controller (will use this for tank PH monitoring) Milwalkee PH controller as well (i will use this for the CA reactor) I have read a lot about the various CA reactors and I understand the chemisty and the process. My question is mainly concerning the Schuran and the setup process. From what i have read the Schuran CA reactors operate a little different than most units. Based on the reading I am guessing that I should use something like an aqualifter pump to feed the unit. Anyway, thanks in advance for anyone's assistance!

01/01/2015, 12:06 PM	#3
janey Premium Member Join Date: Aug 2003 Location: PA - Poconos Posts: 559	Hi Did you ever get it going ?? I have the same one and i want to set it up ? __________________ RETIRED But working to earn money and pay aquarium costs... Current Tank Info: 65 and 110 gal Penisula tanks and Soon a 120

09/13/2009, 07:29 PM	#2
dmccoy Registered Member Join Date: Jul 2009 Posts: 2	Bump