Aqua remora C pro w/ Mag 7

sfarid123 · 11/20/2009, 02:02 PM

Hi,

I'd like to know anyone has tried a mag 7 & w/ their Aqua Remora C pro and if it has improved their skimming.

Thanks

herozero · 11/20/2009, 02:10 PM

i goofed around with a 600gph eheim pump on my urchin pro. try it, it's pretty fun.

chocub · 11/20/2009, 02:38 PM

Just wanna make sure that the pump does not come off from too much back pressure and have water splash all over the place. :\

herozero · 11/20/2009, 02:41 PM

i got a fair amount of bubbles with 600gph running thru it, but no pump flying off.

sfarid123 · 11/20/2009, 03:12 PM

Thanks for the reply,

Did you get the dry or wet skimmage w/ the 600 gph pump?

herozero · 11/20/2009, 03:13 PM

WET. although i didn't leave it on for very long, ditched the urchin for an swc. you might consider putting a valve on the input tubing to fine tune it.

motoms · 11/20/2009, 03:57 PM

I wouldn't go with anything more that a mag 5 that's what i used with my pro and it worked great

11/20/2009, 02:02 PM	#1
sfarid123 Registered Member Join Date: Mar 2007 Location: maryland Posts: 456	Aqua remora C pro w/ Mag 7 Hi, I'd like to know anyone has tried a mag 7 & w/ their Aqua Remora C pro and if it has improved their skimming. Thanks

11/20/2009, 02:10 PM	#2
herozero Registered Member. Join Date: Jul 2008 Location: Los Angeles, CA Posts: 717	i goofed around with a 600gph eheim pump on my urchin pro. try it, it's pretty fun.

11/20/2009, 02:38 PM	#3
chocub Registered Member Join Date: Aug 2007 Location: Washington,DC Posts: 1	Just wanna make sure that the pump does not come off from too much back pressure and have water splash all over the place. :\

11/20/2009, 02:41 PM	#4
herozero Registered Member. Join Date: Jul 2008 Location: Los Angeles, CA Posts: 717	i got a fair amount of bubbles with 600gph running thru it, but no pump flying off.

11/20/2009, 03:12 PM	#5
sfarid123 Registered Member Join Date: Mar 2007 Location: maryland Posts: 456	Thanks for the reply, Did you get the dry or wet skimmage w/ the 600 gph pump?

11/20/2009, 03:13 PM	#6
herozero Registered Member. Join Date: Jul 2008 Location: Los Angeles, CA Posts: 717	WET. although i didn't leave it on for very long, ditched the urchin for an swc. you might consider putting a valve on the input tubing to fine tune it.

11/20/2009, 03:57 PM	#7
motoms Registered Member Join Date: Oct 2008 Location: Michigan Posts: 72	I wouldn't go with anything more that a mag 5 that's what i used with my pro and it worked great