Euroreef RS-250 skimmer - $220

raynist · 12/26/2009, 06:04 PM

Excellent condition, rated for 250g, comes with everything including a gate valve.

Uses a GenX 6100 needle wheel pump.

Paid $450+ new.

Here is a picture:

bmiller1234 · 12/27/2009, 08:29 PM

Ray, did you get my PM?

raynist · 12/27/2009, 08:37 PM

I did, and a sent a long response, you didn't get it??

raynist · 01/04/2010, 02:26 PM

Bump, $200 if you pick up this week.

Yinzer · 01/04/2010, 04:59 PM

Ok let me talk to the boss!

Yinzer · 01/04/2010, 08:31 PM

It's a go. When will you be around this week?

raynist · 01/04/2010, 08:59 PM

I am home any night this week

just make sure you have enough room for this as it is pretty tall. Will get an exact measurement shortly.

raynist · 01/04/2010, 09:05 PM

Here is the exact skimmer:

http://www.aquacave.com/detail.aspx?ID=1325

it is 30 inches tall and requires zero clearance to remove the cup.

Yinzer · 01/05/2010, 09:00 AM

Uuugh, too tall. I have about 25.5" clearance and that is cutting it close.

raynist · 01/05/2010, 09:50 AM

There is a guy selling the rs180 on the selling forum for the same price, or take a look at levichars.

Yinzer · 01/06/2010, 11:56 AM

i cant find the sellers forum

AHDOnline · 01/06/2010, 12:08 PM

The main sellers forum on RC is here:
http://reefcentral.com/forums/forumdisplay.php?f=2

AHDOnline · 01/06/2010, 12:11 PM

Levi's post is here:
http://reefcentral.com/forums/showthread.php?t=1764033

Dims of this one are:
Dimensions: 9" x 5.25" x 20" (requires an additional 1" for removal of collection cup)

Drone · 01/06/2010, 12:40 PM

You have to be approved to access the selling forums. I think it's a combination of time on the boards and number of posts.

Good luck,
Kevin

raynist · 01/06/2010, 01:01 PM

Here you go

http://reefcentral.com/forums/forumdisplay.php?f=2

NaClH2Opgh · 01/06/2010, 01:49 PM

With him it's going to be the 50/90 rule. You can't even see the selling forum unless you have both 50 posts and a member for 90 days.

raynist · 01/06/2010, 03:54 PM

Oh, I thought you could at least read it, but not post.

bmiller1234 · 01/06/2010, 04:03 PM

I could fit the 250 in my stand....

Ray, does it take the same footprint as the 180 I just got off you? If so I have plenty of room for it, although I did pay 240 I would be willing to trade for the 250 and you can have the 180 with the eggcrate stand for it and sell to yinzer? I did redo the elbow off the pump to lower the skimmer about 1/2inch and tuck against the housing so I didn't need flex hose but I do still have it if yinzer would need it. I can take it out of sump and meet you at your office tomorrow afternoon with it if you want.

Yinzer, would you be interested?

Ray would you be interested?

raynist · 01/06/2010, 04:08 PM

Yep, same footprint and same pump, it is just 6 inches taller.

I am up for that if he is.

I will not be in the office until Friday though.

--Ray

Yinzer · 01/06/2010, 05:39 PM

Yes I'm all for it. I'm hurting with the P.O.S that I am using now!

raynist · 01/06/2010, 06:10 PM

Ok.

I will bring the 250 to work with me on Friday for the exchange.

I will be around Friday night if you want to pick up the 180.

bmiller1234 · 01/06/2010, 07:18 PM

Sounds good. I have it running right now, so will pull it out friday morning and clean it up a bit and bring it with me.

Ray, I will give you a call when I pull in the lot, prob around 4 on friday, if way earlier or later I will ring you.

Yinzer, I made a egg crate stand since it has the upgraded pump that hangs lower than the smaller original. I have my sump baffles set at 9" that puts the skimmer depth right at 7.5 inches which is ideal. Should work well for you, My 100 is cycling and been cycling with flake food and it still pulls gunk, I think it would pull gunk out of rodi water!!

Yinzer · 01/06/2010, 10:28 PM

Sounds good, guys.

As long ad it's no higher than 24 or 25" i'm in good shape.

Beth and I will go to Al's Cafe for dinner and I'll stop over after unless you are going out, I can stop before.

raynist · 01/06/2010, 10:58 PM

Quote:

Originally Posted by Yinzer

Sounds good, guys.

As long ad it's no higher than 24 or 25" i'm in good shape.

Beth and I will go to Al's Cafe for dinner and I'll stop over after unless you are going out, I can stop before.

Here is a link to the skimmer, it is 24 inches tall.

http://www.aquacave.com/detail.aspx?ID=1324

--Ray

raynist · 01/06/2010, 11:04 PM

Quote:

Originally Posted by Yinzer

Sounds good, guys.

As long ad it's no higher than 24 or 25" i'm in good shape.

Beth and I will go to Al's Cafe for dinner and I'll stop over after unless you are going out, I can stop before.

After is probably fine. I should be home around 6:30.

Do you still have my phone number?

12/26/2009, 06:04 PM	#1
raynist Registered Member Join Date: Apr 2005 Location: Pittsburgh, PA Posts: 4,921	Euroreef RS-250 skimmer - $220 Excellent condition, rated for 250g, comes with everything including a gate valve. Uses a GenX 6100 needle wheel pump. Paid $450+ new. Here is a picture:

12/27/2009, 08:29 PM	#2
bmiller1234 Registered Member Join Date: Mar 2009 Location: Cranberry TWP PA Posts: 802	Ray, did you get my PM? __________________ Brian Am I hallucinating here? Just what in the hell do you think you're doing?

01/06/2010, 04:03 PM	#18
bmiller1234 Registered Member Join Date: Mar 2009 Location: Cranberry TWP PA Posts: 802	I could fit the 250 in my stand.... Ray, does it take the same footprint as the 180 I just got off you? If so I have plenty of room for it, although I did pay 240 I would be willing to trade for the 250 and you can have the 180 with the eggcrate stand for it and sell to yinzer? I did redo the elbow off the pump to lower the skimmer about 1/2inch and tuck against the housing so I didn't need flex hose but I do still have it if yinzer would need it. I can take it out of sump and meet you at your office tomorrow afternoon with it if you want. Yinzer, would you be interested? Ray would you be interested? __________________ Brian Am I hallucinating here? Just what in the hell do you think you're doing?

01/06/2010, 07:18 PM	#22
bmiller1234 Registered Member Join Date: Mar 2009 Location: Cranberry TWP PA Posts: 802	Sounds good. I have it running right now, so will pull it out friday morning and clean it up a bit and bring it with me. Ray, I will give you a call when I pull in the lot, prob around 4 on friday, if way earlier or later I will ring you. Yinzer, I made a egg crate stand since it has the upgraded pump that hangs lower than the smaller original. I have my sump baffles set at 9" that puts the skimmer depth right at 7.5 inches which is ideal. Should work well for you, My 100 is cycling and been cycling with flake food and it still pulls gunk, I think it would pull gunk out of rodi water!! __________________ Brian Am I hallucinating here? Just what in the hell do you think you're doing?

12/27/2009, 08:37 PM	#3
raynist Registered Member Join Date: Apr 2005 Location: Pittsburgh, PA Posts: 4,921	I did, and a sent a long response, you didn't get it??

01/04/2010, 02:26 PM	#4
raynist Registered Member Join Date: Apr 2005 Location: Pittsburgh, PA Posts: 4,921	Bump, $200 if you pick up this week.

01/04/2010, 04:59 PM	#5
Yinzer Moved On Join Date: Dec 2009 Posts: 653	Ok let me talk to the boss!

01/04/2010, 08:31 PM	#6
Yinzer Moved On Join Date: Dec 2009 Posts: 653	It's a go. When will you be around this week?

01/04/2010, 08:59 PM	#7
raynist Registered Member Join Date: Apr 2005 Location: Pittsburgh, PA Posts: 4,921	I am home any night this week just make sure you have enough room for this as it is pretty tall. Will get an exact measurement shortly.

01/04/2010, 09:05 PM	#8
raynist Registered Member Join Date: Apr 2005 Location: Pittsburgh, PA Posts: 4,921	Here is the exact skimmer: http://www.aquacave.com/detail.aspx?ID=1325 it is 30 inches tall and requires zero clearance to remove the cup.

01/05/2010, 09:00 AM	#9
Yinzer Moved On Join Date: Dec 2009 Posts: 653	Uuugh, too tall. I have about 25.5" clearance and that is cutting it close.

01/05/2010, 09:50 AM	#10
raynist Registered Member Join Date: Apr 2005 Location: Pittsburgh, PA Posts: 4,921	There is a guy selling the rs180 on the selling forum for the same price, or take a look at levichars.

01/06/2010, 11:56 AM	#11
Yinzer Moved On Join Date: Dec 2009 Posts: 653	i cant find the sellers forum

01/06/2010, 12:08 PM	#12
AHDOnline Premium Member Join Date: Jan 2007 Location: Freedom, PA Posts: 833	The main sellers forum on RC is here: http://reefcentral.com/forums/forumdisplay.php?f=2

01/06/2010, 12:11 PM	#13
AHDOnline Premium Member Join Date: Jan 2007 Location: Freedom, PA Posts: 833	Levi's post is here: http://reefcentral.com/forums/showthread.php?t=1764033 Dims of this one are: Dimensions: 9" x 5.25" x 20" (requires an additional 1" for removal of collection cup)

01/06/2010, 12:40 PM	#14
Drone Moved On Join Date: Dec 2009 Location: Pgh, PA Posts: 562	You have to be approved to access the selling forums. I think it's a combination of time on the boards and number of posts. Good luck, Kevin

01/06/2010, 01:01 PM	#15
raynist Registered Member Join Date: Apr 2005 Location: Pittsburgh, PA Posts: 4,921	Here you go http://reefcentral.com/forums/forumdisplay.php?f=2

01/06/2010, 01:49 PM	#16
NaClH2Opgh Moved On Join Date: Sep 2009 Location: Pittsburgh, PA. Posts: 647	With him it's going to be the 50/90 rule. You can't even see the selling forum unless you have both 50 posts and a member for 90 days.

01/06/2010, 03:54 PM	#17
raynist Registered Member Join Date: Apr 2005 Location: Pittsburgh, PA Posts: 4,921	Oh, I thought you could at least read it, but not post.

01/06/2010, 04:08 PM	#19
raynist Registered Member Join Date: Apr 2005 Location: Pittsburgh, PA Posts: 4,921	Yep, same footprint and same pump, it is just 6 inches taller. I am up for that if he is. I will not be in the office until Friday though. --Ray

01/06/2010, 05:39 PM	#20
Yinzer Moved On Join Date: Dec 2009 Posts: 653	Yes I'm all for it. I'm hurting with the P.O.S that I am using now!

01/06/2010, 06:10 PM	#21
raynist Registered Member Join Date: Apr 2005 Location: Pittsburgh, PA Posts: 4,921	Ok. I will bring the 250 to work with me on Friday for the exchange. I will be around Friday night if you want to pick up the 180.

01/06/2010, 10:28 PM	#23
Yinzer Moved On Join Date: Dec 2009 Posts: 653	Sounds good, guys. As long ad it's no higher than 24 or 25" i'm in good shape. Beth and I will go to Al's Cafe for dinner and I'll stop over after unless you are going out, I can stop before.