|
01/23/2010, 12:36 PM | #1 |
Registered Member
Join Date: May 2006
Location: Spokane, WA
Posts: 3,852
|
Replacing ballast??
I currently have a 6 bulb Tek5 fixture. For a couple of weeks, off and on, bulbs 2 and 3 would fire and then go out. Other times, bulbs 2 and 3 would fire and stay on. This morning, all 4 center bulbs will fire and then immediately go out. I'm assuming the ballast is bad. I'd like to replace that ballast with an Ice Cap 660. Do I need the Ice Cap 660 Wiring Harness? Will the Ice Cap ballast fit inside the fixture, or do I need to wire it and house the ballast outside the fixture? Is the wiring and replacement pretty straight forward?
Any and all help would be appreciated!! |
01/23/2010, 01:14 PM | #2 |
Registered Member
Join Date: May 2006
Location: Spokane, WA
Posts: 3,852
|
Ugghh, now I just tried them again, after they failed to light, several times, and they all 4 lit up and stayed lit....
|
01/23/2010, 06:29 PM | #3 |
Registered Member
Join Date: Dec 2009
Location: UT
Posts: 406
|
hey...i am not familiar with the light, but i did have a similar problem with the T8 on my FW tank, and all i did was replace the starters for $3, and all the lights run great
__________________
-John D 55 Gal - Agg African Cichlid ~ 55 Gal - Comm African Cichlid ~ 75 Gal - Empty ~ 75 Gal Hex - Empty ~ 10 Gal - Fish Timeout tank (N. Fusco) ~ 5 Gal Marineland - Fry Tank(24 M. Auratus) ~ 240 Gal Acrylic - Empty and possibly failure waiting to happen |
|
|