|
|
|
03/08/2010, 03:03 PM
|
#1 |
|
Registered Member
Join Date: Aug 2009
Posts: 42
|
Short pulse mode
I was just trying to get a wave going with my 2 mp40w on anti sync but my new unit doesn't seem right. If i turn the dial right down so it should be a rapid on-off every so often it stays on full power for about 5 seconds. Its a week old any ideas.
|
|
|
|
03/08/2010, 03:28 PM
|
#2 |
|
RC Sponsor
 
Join Date: Sep 2005
Location: Allentown, PA
Posts: 4,870
|
Move the drivers closer together, this should help. It sounds like packets are being lost.
__________________
Tim Marks President EcoTech Marine www.ecotechmarine.com If the above information doesn't help you, please contact us at 1-800-785-0338 ext. 2 or by e-mailing [email]support@ecotech |
|
|
|
|
03/08/2010, 03:36 PM
|
#3 |
|
Registered Member
Join Date: Aug 2009
Posts: 42
|
Hi tim how close do they have to be as there in my cabinet 4ft apart thanks
Michael |
|
|
|
|
03/08/2010, 03:56 PM
|
#4 |
|
RC Sponsor
Join Date: Sep 2005
Location: Allentown, PA
Posts: 4,870
|
I'd move them about two feet apart and see if that helps with the dropped packets.
__________________
Tim Marks President EcoTech Marine www.ecotechmarine.com If the above information doesn't help you, please contact us at 1-800-785-0338 ext. 2 or by e-mailing [email]support@ecotech |
|
|
|
|
03/09/2010, 01:39 PM
|
#5 |
|
Registered Member
Join Date: Aug 2009
Posts: 42
|
Moved closer now working fine many thanks Tim
Michael |
|
|
|
 |
|
|
