temp reading w/Ac3

Holyreefer · 12/06/2010, 03:38 PM

If i reset my memory on my ac3 does the temp probe go to its original setting?

kenargo · 12/06/2010, 04:29 PM

Yes, the temp probe calibration will be reset as well. This may not be that bit of an issue though as there are a few things that can help...

* Calibration offset for temp probes is usually very small (0 - +/1 1.5 F) so it it likely that you won't be that different

* If you take note of the reading, perform the reset and then calibrate to the temperature you noted before the reset it is likely you won't be off by much if any since the chances of a change in temp so quickly would be quite small.

12/06/2010, 03:38 PM	#1
Holyreefer Octopus Extreme 300 Skimr Join Date: Oct 2002 Posts: 2,242	temp reading w/Ac3 If i reset my memory on my ac3 does the temp probe go to its original setting? __________________ Life is what you make it, so make something out of everything you do! Current Tank Info: GYRE 150,Seaswirl 1.5, Barcuda Pump, Custom LED system, Extreme Reef Octopus 300 Protein Skimmer, 80 watt Aqua UV, Korallin BioDenitrator Nitrate, Hydor Magnum 8 Powerheads

12/06/2010, 04:29 PM	#2
kenargo Premium Member Join Date: Jan 2007 Location: Redmond, WA Posts: 8,151	Yes, the temp probe calibration will be reset as well. This may not be that bit of an issue though as there are a few things that can help... * Calibration offset for temp probes is usually very small (0 - +/1 1.5 F) so it it likely that you won't be that different * If you take note of the reading, perform the reset and then calibrate to the temperature you noted before the reset it is likely you won't be off by much if any since the chances of a change in temp so quickly would be quite small. __________________ Click on my name to visit my homepage and access a collection of AquaController and Apex software, tips, trick and other Q&A including a link to the 'unofficial Apex new users guide' with loads of helpful information and don't forget to put a pin in my location map. Current Tank Info: 225G, BK 300 Deluxe, Deltec PF601, Precision Marine Kalkreactor, 2-LMIII+6 pumps, SpectraPure UHE, Apex, LunarSim, Tunze 6305s. Mixed reef, clam, fish, etc.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ambient Temp Sensor for AC3?	qfrisco	Neptune Systems	1	02/26/2009 01:32 PM
weird temp reading on AC3	jlinzmaier	Neptune Systems	10	10/01/2008 10:45 AM
ORP readings ?? Temp readings??	benf	Neptune Systems	1	01/31/2008 06:58 AM
rubber cap on NEW temp probe for AC3/JR/PX1000 ?	wizsmaster	Neptune Systems	6	01/10/2008 08:25 AM
Temp probe for AC3 - PRBTMP not correct?	PSam	Neptune Systems	3	12/01/2007 01:15 PM