For Sale: CPR Medium Hang on Back Refugium

techdiver · 11/08/2012, 06:49 PM

I am about to move my nano to the living room. I have decided to remove the CPR Fuge since it takes up almost the entire back of my tank. This is the medium size. I will have to measure the dimensions and post that as well. I have ran it for a few years. I made a lexan top to protect the light I made for it. It will include The lexan cover, light, reef rubble, pump, and a large amount of chaeto. It is everything you need to start using it. $70 I will post some pictures I took with my phone.

techdiver · 11/08/2012, 08:08 PM

With the light on. It is blacked out so light doesn't spill over into the tank.

Here is the top.

The chaeto growing inside.

maynardjames · 11/08/2012, 09:02 PM

hmm be sweet behind my sump. it hang or sit on top of tank?

techdiver · 11/08/2012, 09:38 PM

Quote:

Originally Posted by maynardjames

hmm be sweet behind my sump. it hang or sit on top of tank?

It hangs on the back. I think it is around 3 gallons capacity.

techdiver · 11/08/2012, 10:47 PM

Water Capacity: 3.60 Gallons

Dimensions: 19" L x 4.5" W x 12" T

Includes Maxi-Jet 600 and Valve kit.

eric shelsy · 12/06/2012, 08:14 AM

I'll Buy It! you can email me ericshelsy@gmail.com or text me 413 822-2142 Thanks Eric

techdiver · 12/06/2012, 08:37 AM

Quote:

Originally Posted by eric shelsy

I'll Buy It! you can email me ericshelsy@gmail.com or text me 413 822-2142 Thanks Eric

I sent you an email.

techdiver · 12/08/2012, 01:44 PM

Sorry for the delay, Eric. My phone was dead when I was going to take some more pics. Anyway, here they are after it is uninstalled.

Parts kit will be included (these were left overs):

Here is the custom light shield I made that goes with it. The lexan tabs keep it on the fuge and also keep the light centered.

Here is the light fixture that I cut each end off with my miter saw to cutomize the lenght. I then assembled it and fused the plastic with Weldon. I made the inside white to reflect more light. I also gutted the tube and installed a basic cfl bulb that uses 13 watts. You can pick these up cheap anywhere, and it grows cheato like crazy in this thing.

A closer look at my fixture install:

Logiq · 01/11/2013, 07:39 PM

You still got this

techdiver · 01/11/2013, 08:21 PM

Quote:

Originally Posted by Logiq

You still got this

Yes. It will just be the refugium, custom lexan top, custom light, and spare parts. I have a little bit of rubble rock that can go with it.

burzaco1 · 07/31/2013, 09:57 AM

Do you still have the tank and if so comes with a pump.

techdiver · 07/31/2013, 01:40 PM

Sorry, but this has been sold.

11/08/2012, 06:49 PM	#1
techdiver Registered Member Join Date: May 2009 Posts: 1,401	For Sale: CPR Medium Hang on Back Refugium I am about to move my nano to the living room. I have decided to remove the CPR Fuge since it takes up almost the entire back of my tank. This is the medium size. I will have to measure the dimensions and post that as well. I have ran it for a few years. I made a lexan top to protect the light I made for it. It will include The lexan cover, light, reef rubble, pump, and a large amount of chaeto. It is everything you need to start using it. $70 I will post some pictures I took with my phone. __________________ Jackson Area Reef Club

11/08/2012, 08:08 PM	#2
techdiver Registered Member Join Date: May 2009 Posts: 1,401	With the light on. It is blacked out so light doesn't spill over into the tank. Here is the top. The chaeto growing inside. __________________ Jackson Area Reef Club

11/08/2012, 09:02 PM	#3
maynardjames Registered Member Join Date: Jan 2007 Location: west tennessee Posts: 1,600	hmm be sweet behind my sump. it hang or sit on top of tank? __________________ if your 555 Current Tank Info: 120 rr dual overflows, solarflare t5 fixture,octo extreme 200,vortech mp40w esx2. brs reactor for carbon, brs reactor for gfo, 40 gal breeder sump

11/08/2012, 10:47 PM	#5
techdiver Registered Member Join Date: May 2009 Posts: 1,401	Water Capacity: 3.60 Gallons Dimensions: 19" L x 4.5" W x 12" T Includes Maxi-Jet 600 and Valve kit. __________________ Jackson Area Reef Club

12/08/2012, 01:44 PM	#8
techdiver Registered Member Join Date: May 2009 Posts: 1,401	Sorry for the delay, Eric. My phone was dead when I was going to take some more pics. Anyway, here they are after it is uninstalled. Parts kit will be included (these were left overs): Here is the custom light shield I made that goes with it. The lexan tabs keep it on the fuge and also keep the light centered. Here is the light fixture that I cut each end off with my miter saw to cutomize the lenght. I then assembled it and fused the plastic with Weldon. I made the inside white to reflect more light. I also gutted the tube and installed a basic cfl bulb that uses 13 watts. You can pick these up cheap anywhere, and it grows cheato like crazy in this thing. A closer look at my fixture install: __________________ Jackson Area Reef Club

12/06/2012, 08:14 AM	#6
eric shelsy Registered Member Join Date: Mar 2009 Location: Lanesboro MA Posts: 14	I'll Buy It! you can email me ericshelsy@gmail.com or text me 413 822-2142 Thanks Eric

01/11/2013, 07:39 PM	#9
Logiq Registered Member Join Date: Dec 2010 Posts: 284	You still got this

07/31/2013, 09:57 AM	#11
burzaco1 Registered Member Join Date: Jul 2013 Posts: 2	Do you still have the tank and if so comes with a pump.

07/31/2013, 01:40 PM	#12
techdiver Registered Member Join Date: May 2009 Posts: 1,401	Sorry, but this has been sold. __________________ Jackson Area Reef Club