|
12/02/2012, 06:01 PM | #1 |
Registered Member
Join Date: Oct 2010
Location: Acton, On, Canada
Posts: 179
|
BRS Doseing pump inconsistent.
Ive been testing these 2 BRAND new pumps i just got from BRS and WELL Im very unhappy with what i have so far.
All test were performed with 2' intake hose, 2' return hose. Pumps are 12" above supply water for testing. Day 1 On for 10 Mins Both pumps = 11 mls Day 2 Pump 1 On for 10 mins = 13ml Pump 2 on for 10 mins= 18mls Day 3 Installed on my RKL Channel 1 and 4. Pumps are alone on the RKL PC4 power bar Pump 1 10 min on time Off 50min, repeat 7 times a day = 90ml Pump 2 10 min on time off 40min, repeat 7 times a day = 95ml Day 4 Still on my RKL, Channel 1 and 4 Pumps are alone on the RKL PC4 power bar Pump 1 10 min on time, off 50 min, Repeat 7 times 103 ml Pump 2 10 min on time, off 40 min, repeat 7 times 95 ml. Day 5 Plugged into the wall, monitored with stop watch. Pump 1 On time 30 mins, 60 ml. Pump 2 On time 30 mins, 45 ml. Any advice would be great, I think these might be the worst pumps ive ever seen, UNLESS Im doing something wrong. Or do i send them back and buy a libra? |
12/02/2012, 06:38 PM | #2 |
Registered Member
Join Date: Jun 2009
Location: Fort Collins,CO
Posts: 426
|
I would contact BRS. I have these pumps and they have been perfect from day one. Maybe you just got some bad pumps
|
12/02/2012, 07:11 PM | #3 |
Registered Member
Join Date: Oct 2010
Location: Acton, On, Canada
Posts: 179
|
Ill call them in the Morning then... I was not sure if they needed to be set up a perfect way...
BTW 40 min test got me 58mls of water On a new power source. |
|
|