|
|
|
03/20/2014, 12:05 PM
|
#1 |
|
Registered Member
Join Date: Dec 2013
Location: Louisiana
Posts: 17
|
LED Build Questions
I am putting togather two 6" x 20" heatsyncs, 30 LED's each:
12 Cree XP-G R5 Cool White 12 Cree XT-E Royal Blue 3 Philips Rebel ES Cool White 3 Philips Rebel ES Royal Blue There are 6 open spots on each heatsync, and I was thinking of filling them with some colors, red, green, and/or violet, or any other combination that might be benifitial. What do you all suggest adding for these 6 spots? Edit: By the way, 90 gallon standard tank. Last edited by rsc350; 03/20/2014 at 12:14 PM. |
|
|
|
03/20/2014, 12:16 PM
|
#2 |
|
Registered Member
Join Date: Sep 2003
Location: North Carolina
Posts: 20,050
|
some UV (400-420nm) a few Red and a few Green
BUT.. if your optics aren't done properly you WILL have red/green spots on the bottom of the tank.. Those colors should be "peppered" around the fixture.. Not centrally located.
__________________
Who me? |
|
|
|
|
03/20/2014, 12:29 PM
|
#3 |
|
Registered Member
Join Date: Dec 2013
Location: Louisiana
Posts: 17
|
BWBWBWBWB
W-WB-BW-W B-BW-WB-B WBWBWBWBW So 4 rows, 9 columns. Row 2 and 4, columns 2, 5, and 8 are the 6 open spots per side. So they would not really be central, but it may be more logical then to go with just 2 different colors instead of 3 so they are not peppered. |
|
|
|
|
03/20/2014, 03:19 PM
|
#4 |
|
Registered Member
Join Date: Dec 2013
Location: Louisiana
Posts: 17
|
I am thinking either 3 violet and 3 red-orange on each side or should I go 4 violet and 2 red-orange on each side?
|
|
|
|
|
03/20/2014, 09:30 PM
|
#5 |
|
Registered Member
Join Date: Dec 2013
Location: Louisiana
Posts: 17
|
anyone?
|
|
|
|
 |
|
|
