Enought light for fuge?

[nuxx]

Hey everyone,

Trying to see if you think I have enough light in our fuge for Chaeto to do well.

The fuge area is ~ 30x20x20.

Have the following LEDs on there:
Build My LED - XB Fuge LED
Chinese Full Specturm 165 Watt Full Spectrum (3watt x 55 - White, Blue, Green, Red, etc...)

Here is a video:

[kevin_e]

Way more than you need.

A lot of people use these:

http://www.homedepot.com/p/HDX-150-W...7?N=5yc1vZbm7i

[d2mini]

Originally Posted by kevin_e

Way more than you need.

A lot of people use these:

http://www.homedepot.com/p/HDX-150-W...7?N=5yc1vZbm7i

Just because a lot of people use them doesn't mean it's going to get you the best growth.
I use a 150w HPS bulb and growth is insane.
As Tim The Toolman would say... "more power! Argh Argh Argh Argh!"


www.everydayreef.com

[criticalencore]

Over my fuge roughly that size I use a diy 6 3w Cree neutral light stick I thermal epoxies to a 1.25" aluminum square tubing and use a 18v 500 mA wall wort and get crazy calupera growth.

You could prog get by with a CFL and a clip on light. What you have seems excessive

[kevin_e]

Originally Posted by d2mini

Just because a lot of people use them doesn't mean it's going to get you the best growth.
I use a 150w HPS bulb and growth is insane.
As Tim The Toolman would say... "more power! Argh Argh Argh Argh!"


www.everydayreef.com

Didn't insinuate that either way. Just my way of answering his question by saying he has more than enough light

[nuxx]

LOL so I'm good to go?

Was thinking about adding another cheap Chinese LED

I guess I'll see if the Chaeto starts to float tomorrow or the next day...