|
07/08/2015, 02:46 AM | #1 |
Registered Member
Join Date: Aug 2013
Posts: 4
|
LED Advice
Hey all,
Im about to start up a ocean free nano 5 which is an AIO tank. The actual measurements of dispaly are 2ft l x 1ft w x 1.4ft d when you take the rear section for media and equipment out of play. Can you recommend lighting that supports this size for full mixed reef?? Im liking the following units but not sure if spread is good enough Kessil A160WE AI Prime Maxspect razor 120w 16000k Looked at Chinese black boxes but unsure and really want to tank mount not hang Any advice would be much appreciated |
07/08/2015, 03:02 AM | #2 |
Registered Member
Join Date: May 2012
Posts: 381
|
A diy led wouldn't be too hard to make for something that size. I'm not sure what the inside of the hood looks like on one of those though (I've done a couple red sea max for people and the hoods are a nightmare to get apart). Basically you could just use a couple 1.25" square aluminum tubing and thermal epoxy your led to that. You could use dimmable meanwell drivers to power them or even ac/dc adapters if you didn't care if they were dimmable but on something that shallow you won't need a lot of mA going to the led or it could be way too much light. Can you post a pic of the hood of the tank?
|
07/08/2015, 03:10 AM | #3 |
Registered Member
Join Date: Aug 2013
Posts: 4
|
its hoodless
so looking for something thats tidy but can be tank mounted, im terrible at DIY |
07/09/2015, 08:16 PM | #4 |
Registered Member
Join Date: Feb 2011
Posts: 544
|
I am biased, i love my razor.
|
|
|