|
|
|
02/21/2016, 11:34 PM
|
#1 |
|
Registered Member
Join Date: Jul 2004
Location: Long Island N.Y.
Posts: 304
|
MP60 dry side noise
HI, I have an MP60 2012 build date and the dry side noise is real bad even with the QD up grade . Has any one replaced the bearings ? I really can not by a new dry side . Thanks , Pete
__________________
PHK Current Tank Info: 204 mixed Two Radion pro 3 one Kessil 360 Bubble King Supermarin 250 Apex 114 watt UV |
|
|
|
02/23/2016, 09:21 AM
|
#2 |
|
Registered Member
Join Date: Jul 2004
Location: Long Island N.Y.
Posts: 304
|
bump
__________________
PHK Current Tank Info: 204 mixed Two Radion pro 3 one Kessil 360 Bubble King Supermarin 250 Apex 114 watt UV |
|
|
|
|
02/23/2016, 09:47 AM
|
#3 |
|
Registered Member
Join Date: Apr 2012
Location: Gold Canyon
Posts: 2,914
|
There is no information for the MP60 bearings, but you could be a pioneer
With the bearings it is best to open the unit and get the bearing ID from the side of the bearing. If there is no ID on the bearing then you need to measure the ID, OD and the thickness. Also only use a good brand of bearing such as *** SKF etc... And whatever you do, don't damage the magnet as you can't get replacements. |
|
|
|
|
02/23/2016, 10:06 AM
|
#4 |
|
Registered Member
Join Date: Jul 2004
Location: Long Island N.Y.
Posts: 304
|
I just picked it up used the person I bought it from said it was quiet , he is working with me . I sent it in to the company with hopes they will help me. If not I will be the pioneer . Is this common on a pump like this thats less than four years old ? I only had Tunze before trying one of these . Funny I have another same age and did a QD upgrade and it's awesome
__________________
PHK Current Tank Info: 204 mixed Two Radion pro 3 one Kessil 360 Bubble King Supermarin 250 Apex 114 watt UV |
|
|
|
 |
|
|
