|
08/23/2016, 04:22 PM | #1 |
Registered Member
Join Date: Jul 2016
Location: Oakdale, MN
Posts: 461
|
Help me with my Nitrates
Hello everyone, My reef tank has been up and running for just over 2 months. The tank and live rock was well established tank (4+ years old). I bought it from a guy that was getting out of the hobby. Its a Red Sea C130 tank (34 gallons). I tore it down and had it set up and running the same day.
The only thing I added at start up was live sand and fresh water. There were corals and fish that came with the tank and those went in as well. Im pretty sure the tank has went thru its cycle, since the ugly phase is now gone and the corals and fish look really happy and the corals are growing nicely. Since about the third week, is when I noticed my nitrates start to increase. During the cycle they hit as high as 20, but now they average between 5-10. Im using RO/DI water and do weekly water changes. Most of the time 5 gallons, but when I notice them start to creep up I do a 10 gallon change. I do have some green algae growing on the back wall of the tank and where the sand bed meets the glass. Its not thick, more of a green tint. I just did a 10 gallon water change on 8/20 because my nitrates were at 10. I tested on 8/21 and they were still at 10. Today they were down to about 7.5. Im using the Salifert tests and I also compared with the API test and its pretty close. I have only ever had a small ammonia spike during the cycle, I have never had any nitrites. Todays results Temp 78.8 Sal. 1.023 Ammonia 0 nitrites 0 Nitrates 7.5 alk. 12.2 ph 8.1 phos. 0 calc. 430 mag. 1330 Are my Nitrates to high and if so how do I get them down lower yet? Im just stumped as to why I cant get them lower.. SW 8.8.16.1.jpg Last edited by Str8linespeed; 08/23/2016 at 04:32 PM. |
08/23/2016, 05:03 PM | #2 |
Registered Member
Join Date: Jul 2011
Location: Wyocena Wi
Posts: 6,936
|
Personally I would not sweat the 5-10 nitrates. Judging from your pic things look good. I do not see any SPS, If you start getting into SPS then you may need to try and tweak them down. Good luck just my 2 cents.
__________________
Tony Current Tank Info: 180gal DT, BM NAC77 skimmer,3 Maxspect razors, Maxspect Gyre 150, 30g QT |
08/23/2016, 05:23 PM | #3 | |
Registered Member
Join Date: Apr 2015
Location: Huntington, NY
Posts: 391
|
Quote:
What do you have set up in the sump area in the way of nutrient export. |
|
08/23/2016, 05:30 PM | #4 | |
Registered Member
Join Date: Jul 2016
Location: Oakdale, MN
Posts: 461
|
Quote:
I have two small live rocks (roughly the size of a lemon) in the sump, because I ran out of room in the tank. I also have a reactor with Carbon, but that is it. Should I look at getting something else? I forgot to mention, Im feeding a half cube of Mysis every day, which the fish eat with in 30 seconds. Should I cut that back to a half cube every other day? |
|
08/23/2016, 05:37 PM | #5 |
Registered Member
Join Date: Jul 2011
Location: Wyocena Wi
Posts: 6,936
|
If you have space in your sump a lot of people will put some cheato (cheatomorpha macro algae) in there to help nutrient export.
__________________
Tony Current Tank Info: 180gal DT, BM NAC77 skimmer,3 Maxspect razors, Maxspect Gyre 150, 30g QT |
08/23/2016, 05:40 PM | #6 | |
Registered Member
Join Date: Jul 2016
Location: Oakdale, MN
Posts: 461
|
Quote:
|
|
08/23/2016, 05:41 PM | #7 |
Registered Member
Join Date: Jul 2016
Location: California
Posts: 2,482
|
Couldn't you just do the work and bypass the refugium altogether? You are using the purest water on earth, right? (RO/DI)
|
08/23/2016, 05:45 PM | #8 |
Registered Member
Join Date: Jul 2011
Location: Wyocena Wi
Posts: 6,936
|
I would go with the middle section. I am trying to remember what type of bulb I use to use. I think it was a 6500k bulb in one of those clip on shop lights from depot or lowes. If you do a search I am sure a ton of threads will pop up. As it grows just prune it to remove the nutrients out of the system. I have had a 30g display refugium for awhile now and my memory fades with age
__________________
Tony Current Tank Info: 180gal DT, BM NAC77 skimmer,3 Maxspect razors, Maxspect Gyre 150, 30g QT |
08/23/2016, 05:53 PM | #9 |
Registered Member
Join Date: Jul 2016
Location: California
Posts: 2,482
|
Just out of curiosity did you NEED that refugium or did you just set it up just cause? We all want another tank, no doubt about it... KISS.
|
08/23/2016, 05:58 PM | #10 |
Registered Member
Join Date: Jul 2011
Location: Wyocena Wi
Posts: 6,936
|
A bit of both. I have always tended to feed a bit heavy and I needed to clean some stuff out of closet.
I really do not see what is wrong with using some cheato to help reduce the nitrates if the OP wants to lower them some. A fairly cheap expenditure for this hobby.
__________________
Tony Current Tank Info: 180gal DT, BM NAC77 skimmer,3 Maxspect razors, Maxspect Gyre 150, 30g QT |
08/23/2016, 05:58 PM | #11 | |
Registered Member
Join Date: Apr 2015
Location: Huntington, NY
Posts: 391
|
Quote:
Gone fishing is spot on about the cheato Since you have a skimmer, looking into carbon dosing; nopox, vodka vinegar, bio pettiest etc. They all do the same thing, they feed bacteria that will bind the N before it forms nitrites, and the bacteria gets pulled out by the skimmer. The cheato will consume N&P and then you trim to export. 6500K is correct for photosynthesis, so you don't need expensive lights. It's common to run the cheato lights on the opposite schedule of the DT to keep oxygen and pH up. You can run cheato lights 24 x 7 according to some, most folks believe in a 6 hour down time. |
|
08/23/2016, 06:26 PM | #12 |
Registered Member
Join Date: Jul 2016
Location: Oakdale, MN
Posts: 461
|
Strangely, I enjoy trying to get the nicest water quality that Im capable of.
I know of a few LFS that sell the cheato, but Im wondering if it will survive in my sump. My tank has a hood that is attached to it. I just looked in the sump and light does get to the bottom, from main lighting, but it is not direct lighting. Thoughts? |
08/23/2016, 06:43 PM | #13 |
Registered Member
Join Date: Sep 2013
Posts: 565
|
The cheato can be kept without sand bed?
|
08/23/2016, 07:32 PM | #14 | |
Registered Member
Join Date: Oct 2012
Location: FL, USA
Posts: 1,433
|
Quote:
__________________
Mantis shrimp are the best! Current Tank Info: 20L Peacock mantis shrimp tank |
|
08/23/2016, 07:33 PM | #15 |
Registered Member
Join Date: Oct 2012
Location: FL, USA
Posts: 1,433
|
Yes, it does not require a sand bed.
__________________
Mantis shrimp are the best! Current Tank Info: 20L Peacock mantis shrimp tank |
08/23/2016, 07:44 PM | #16 |
Registered Member
Join Date: Aug 2016
Location: 562, CA
Posts: 467
|
Your nitrates are fine. Try some carbon dosing.
|
08/23/2016, 07:45 PM | #17 |
Registered Member
Join Date: Sep 2013
Posts: 565
|
Thanks nmotz
Regards Khanh |
08/23/2016, 07:59 PM | #18 |
Registered Member
Join Date: Apr 2015
Posts: 462
|
I'm not sure what you're asking. When you put the chaeto in your sump area, you go to Home depot, buy a cheap clip on light and a 6500k bulb. Same aisle. Clip it to something on the back,of your Red sea tank and turn it on when your display light is off. When it grows so that there is no room, trim some, throw it away and your golden. I have know idea what the others are talking about with sandbeds and whatnot. Its really easy.
Sent from my VS985 4G using Tapatalk |
08/23/2016, 10:23 PM | #19 |
Registered Member
Join Date: Dec 2015
Location: Philippines, Manila
Posts: 437
|
I had a small modded 1.5 gallon refugium in my nano thy works like a charm. Kept my nitrates in control as well as my phosphates. I did a one week blackout to kill all my algae and after that all the cyano and hairalgae died. My fuge turned out to be a nice algae paradise with tons of hair algae, chaeto and cyano plus a few strands of caulerpa. Plus you will get bonus pods in your tank
__________________
Broke college student lol Current Tank Info: 10 gallon reef tank build: http://www.reefcentral.com/forums/showthread.php?t=2558717 |
08/23/2016, 11:07 PM | #20 |
Registered Member
Join Date: Jan 2015
Location: New England, U.S.
Posts: 4,595
|
You're more likely to cause a problem by overdoing it at this point, you'll see wacky nitrates for several months until things settle in from the move and you bacteria get sorted. The live sand products don't have those bacteria, and they are pretty picky about getting moved around.
I mean, if you think it would be fun to add a fuge, go for it. But make sure it doesn't turn into its own detritus trap, definitely don't put caulerpa in it, and don't expect much nutrient removal unless it's close to 20% the volume of your tank. A lot of the time people credit them with more than they deserve, where leaving it alone would've accomplished just as much. But they are cute, and can grow some pods for your fish to eat, I guess.
__________________
If you're havin tank problems I feel bad for you, son. I got 99 problems but a fish ain't one Current Tank Info: 3/2016 upgrade to 120g. Chalk bass, melanurus, firefish, starry blenny, canary blenny, lyretail anthias, engineer gobys, kole tang. Softies / LPS / NPS. <3 noob4life <3 |
08/23/2016, 11:20 PM | #21 | |
Registered Member
Join Date: Dec 2015
Location: Philippines, Manila
Posts: 437
|
Quote:
__________________
Broke college student lol Current Tank Info: 10 gallon reef tank build: http://www.reefcentral.com/forums/showthread.php?t=2558717 |
|
08/24/2016, 04:32 PM | #22 | |
Registered Member
Join Date: Jul 2016
Location: Oakdale, MN
Posts: 461
|
Quote:
|
|
08/24/2016, 08:03 PM | #23 |
Registered Member
Join Date: Jun 2006
Location: Surprise Arizona
Posts: 915
|
I have a nearly all SPS system and I try and keep my nitrates at 5. Point is I wouldn't worry about them being between 5 and 10. If you feel the need to lower them just feed a little less food.
__________________
Why is this so addictive. Current Tank Info: You want to know just ask |
08/25/2016, 02:56 PM | #24 |
Registered Member
Join Date: Jul 2016
Location: California
Posts: 2,482
|
Over the years I've realized that keeping sps corals was not all that it's cracked up to be. Sufficient lightimg and keeping your parameters within certain limits seems to please everything...
|
08/25/2016, 06:29 PM | #25 |
Registered Member
Join Date: Jul 2016
Location: Oakdale, MN
Posts: 461
|
Thanks again for all the advice everyone.
|
|
|