|
09/22/2020, 11:16 AM | #1 |
Registered Member
Join Date: Sep 2014
Posts: 58
|
Overflow flushing making my sump level fluctuate
I just set up my 65 gal and my overflow keeps rising and lowering. Its also flushing like a toilet. Im worried because its lowering and raising the levels in my sump and I don’t want my ato to keep filling. Ive read a few places where they say my drain hose may be to long, so i cut it down to an inch in the water. That didnt solve the problem. Does anybody know why it would be doing this. Thanks for the help.
Sent from my iPhone using Tapatalk |
09/22/2020, 12:25 PM | #2 |
Giving my All
Join Date: Apr 2007
Location: Connecticut
Posts: 456
|
You can add a ball valve to control the flow into the sump but what I think you need to do is change the U to a T fitting
Similar to this style with a larger outlet for the air Sent from my iPhone using Tapatalk Pro
__________________
Ritch Current Tank Info: Working on a couple of things |
09/22/2020, 02:07 PM | #3 |
Registered Member
Join Date: Apr 2008
Location: Grove City, Ohio
Posts: 10,806
|
That's a standard DURSO style drain. It appears to be 1" pvc? If so, the MAXIMUM flow you can safely (and quietly) put through it is 300-350gph. 250gph is even better (quieter)
It will help if you put a vent hole in the top like is shown in the above diagram. It will work best with a length of airline tubing inserted through the hole to someplace in the middle of the down tube. Where, exactly, will require some trial and error. Adjust it slightly, allow a few minutes for it to equalize, and then if needed, adjust it again. Keep doing that until there is no flushing and it is as quiet as possible.
__________________
I'll try to be nice if you try to be smarter! I can't help that I grow older, but you can't make me grow up! Current Tank Info: 120 mixed reef with 40b sump, RO 150 skimmer, AI Sol Blue x 2, and a 60g Frag Tank with 100g rubbermaid sump. 2 x Kessil A360w lights, BM curve 5 skimmer |
09/22/2020, 05:32 PM | #4 |
Registered Member
Join Date: Dec 2005
Location: Pingree Grove, IL
Posts: 952
|
You have the top elbows backwards. The one with the two holes and the little vent clear tube needs to be inline with the down tube.
Never put a ball valve on this type of drain. You need to put the valve on the pump to bring the flow down to match the drain after you make the above adjustment. You will probably only get 500-600 GPH with this type of drain but this is all dependent on the plumbing size and how it's run above and below the waterline in the sump. Sent from my SM-G955U using Tapatalk
__________________
"Friendship is like peeing on yourself: everyone can see it, but only you get the warm feeling it brings" Current Tank Info: 67 Long |
10/22/2020, 02:13 AM | #5 |
Registered Member
Join Date: Jan 2009
Location: central california
Posts: 20
|
|
10/22/2020, 06:19 AM | #6 | |
Registered Member
Join Date: Jun 2003
Location: Maryand
Posts: 177
|
Quote:
Also the water level in your sump is quite high. Be sure there is sufficient empty volume to accommodate the water that will drain from the main tank when return pump is off.
__________________
Homer no function beer well without. |
|
10/23/2020, 09:07 AM | #7 |
Registered Member
Join Date: Jan 2007
Location: menifee So cal
Posts: 11,042
|
Buy a DC return pump, that way you can match the flow with the drain.
|
11/16/2020, 12:23 PM | #8 |
Registered Member
Join Date: Nov 2020
Location: Galt, California
Posts: 10
|
did turning the fitting around solve your problem?
|
12/09/2020, 03:16 PM | #9 |
Registered Member
Join Date: Sep 2014
Posts: 58
|
|
|
|