|
11/11/2020, 03:26 PM | #1 |
Registered Member
Join Date: Feb 2016
Location: England, Earl Shilton
Posts: 1,452
|
High Tin on icp test
Hello I've got super high tin reading on my icp test. No other metals. The reading is Tin 148 µg/l, where would this be coming from? I cant see anything obvious, thanks.
__________________
If in doubt ask! |
11/11/2020, 09:40 PM | #2 |
Registered Member
Join Date: Jul 2019
Location: NW Indiana Valparaiso
Posts: 505
|
Do you have any magnetic frag holders in the tank? They can go bad & get a leak around the magnet then leech into the water. Can't think of anything else again unless something has a leak you have not caught yet id consider everything with any metals suspect until the culprit is located.
__________________
Montipora Digitas, Cyphastrea, Blastos, different Leptoseris, Green Stylo, GSP, gorgonions, Ricordea mushrooms, psammocoras, Birdsnest coral, Clownfish, Watchman goby, Royal gamma. Current Tank Info: Nano Reef tank |
04/03/2021, 10:15 PM | #3 |
Registered Member
Join Date: Mar 2005
Location: canada, Grande Praire, Ab
Posts: 5,824
|
One reefer found that plastic tubing leeched tin. Especiallh the green eheim tubing and one other kind.
__________________
Its a good idea to have a refrence sample for alk test kits. 1.1350 grams of baking soda in 1gallon of distilled water=10dkh. Check your alkalinity test kit! Algae is Mother Natures phosphate remover Current Tank Info: 220 galon mixed reef. |
04/04/2021, 09:01 AM | #4 | |
Registered Member
Join Date: Jul 2019
Location: NW Indiana Valparaiso
Posts: 505
|
Quote:
__________________
Montipora Digitas, Cyphastrea, Blastos, different Leptoseris, Green Stylo, GSP, gorgonions, Ricordea mushrooms, psammocoras, Birdsnest coral, Clownfish, Watchman goby, Royal gamma. Current Tank Info: Nano Reef tank |
|
04/09/2021, 12:03 PM | #5 |
Registered Member
Join Date: Feb 2018
Posts: 18
|
it's common in new tanks, something to do with the manufacturing process of the glass, this is what I've heard and seems to follow with various posts I've seen, of course if not a new tank then the above reasons! I'm sure I had tin from a cheap RO pump with a rusting shaft. Just have to methodically go through checking everything
|
|
|