|
|
|
01/13/2005, 07:28 AM
|
#1 |
|
Registered Member
Join Date: Jan 2004
Location: Greenwich, CT
Posts: 1,592
|
Phosban reactor question...
The Phosban reactor I received has 2 main 'holes' through the lid. The middle hole feeds water into the unit, while the second off center hole returns water to the system. BUT there are two more holes through the lid, much smaller and about 1 inch apart?!? What are they there for? Each of those smaller holes is equipped with a riser nipple? I knew when I ran the unit that water would shoot out of them, nevertheless I tried it anyway on a test bucket of water and of course water shot out of them. I attached a small piece of airline tubing between the two holes and that stopped the water from shooting out, but the tubing attachment is not very secure.
IS THIS NORMAL? THE INSTRUCTION NEVER MENTION THESE EXTRA HOLES AND WHAT THEY DO/WHY THEY ARE THERE!!! HELP!!!
__________________
SPS-Anon Current Tank Info: 120 SPS |
|
|
|
01/13/2005, 10:10 AM
|
#2 |
|
Registered Member
Join Date: Feb 2004
Posts: 397
|
mine were sealed,no water coming out.
|
|
|
|
|
01/14/2005, 12:04 PM
|
#3 |
|
Everybody Talks
Join Date: May 2002
Location: East Haddam, CT
Posts: 3,210
|
Hi Pitstop,
Please call us at 1-714-385-0080 or email us at customercare@marinedepot.com so we can help you out. Water should not be coming out those holes. Please let us know if there is anything else we can do for you. Sincerely, Keith M. Marine Depot Customer Service 1-714-385-0080 http://www.marinedepot.com customercare@marinedepot.com
__________________
"We're so busy watching out for what's just ahead of us that we don't take time to enjoy where we are." Calvin & Hobbes "Never become so much of an expert that you stop gaining expertise. View life as a continuous learning experience." Denis Waitley |
|
|
|
 |
|
|
