300 Gallon System

fish-freek-3000 · 05/20/2006, 02:17 PM

the above is the basic drawing of the tank i am having made. The two overflows look wierd but they will look normal later. The tank will be 72*24*30. And one small side will touch the wall. I think it is referred to as penninsula tank.

I plan on having about 1200gph go through the sump. I wanted the bigger holes so i could handle more flow if i wanted it. I am thinking a blueline velocity T4. it does 1200 at 5'6". Do you think this is a good choice? I thought because it is quiet and small.

I know that you need more flow through a tank but no so much through the sump. so I that is why I am only having 1200gph through sump. I plan on using two 6100's on a multi controller for flow. that accompnied with 1200gph should be more than sufficient

For lights I am having 3 250 watt MH with two 96 watt actinics and moon ligths.

All in total the tank will sit at about 66 inches or 5.5 feet. I am making the stand myself to customize it.

What kind of skimmer, calcium reactor, should I get? How big should I make the fuge. and anything else that looks like a problem.

Paul Burgess · 05/21/2006, 06:02 PM

Go with a Deltec skimmer for your soon to be sweet set up. I purchased the Deltec hang on the back and it did not work out for me b/c it was too noisy for where it was in my home. But man, that little skimmer could skim! I understand the larger ones are awesome.

fish-freek-3000 · 05/22/2006, 03:50 PM

i just recieved an almost brand new asm g2 for free from work would this work if were to do the recirc mod. as for the calcium reactor I was thinking of going with the coralife 500. I know it is cheap but people have said it gets the job done

05/20/2006, 02:17 PM	#1
fish-freek-3000 Reefer Join Date: Jul 2005 Location: North Aurora, Illinois Posts: 231	300 Gallon System the above is the basic drawing of the tank i am having made. The two overflows look wierd but they will look normal later. The tank will be 722430. And one small side will touch the wall. I think it is referred to as penninsula tank. I plan on having about 1200gph go through the sump. I wanted the bigger holes so i could handle more flow if i wanted it. I am thinking a blueline velocity T4. it does 1200 at 5'6". Do you think this is a good choice? I thought because it is quiet and small. I know that you need more flow through a tank but no so much through the sump. so I that is why I am only having 1200gph through sump. I plan on using two 6100's on a multi controller for flow. that accompnied with 1200gph should be more than sufficient For lights I am having 3 250 watt MH with two 96 watt actinics and moon ligths. All in total the tank will sit at about 66 inches or 5.5 feet. I am making the stand myself to customize it. What kind of skimmer, calcium reactor, should I get? How big should I make the fuge. and anything else that looks like a problem.

05/21/2006, 06:02 PM	#2
Paul Burgess Registered Member Join Date: Jan 2005 Location: Oklahoma Posts: 69	Go with a Deltec skimmer for your soon to be sweet set up. I purchased the Deltec hang on the back and it did not work out for me b/c it was too noisy for where it was in my home. But man, that little skimmer could skim! I understand the larger ones are awesome.

05/22/2006, 03:50 PM	#3
fish-freek-3000 Reefer Join Date: Jul 2005 Location: North Aurora, Illinois Posts: 231	i just recieved an almost brand new asm g2 for free from work would this work if were to do the recirc mod. as for the calcium reactor I was thinking of going with the coralife 500. I know it is cheap but people have said it gets the job done