![]() |
![]() |
![]() |
#1 |
Registered Member
Join Date: Apr 2005
Location: Chicago IL
Posts: 172
|
What pump for SCWD???
Im in the procesess of buying a SCWD but what pump would I need for the SCWD to operate. The tank is a 30 long. I currently just have a 100 GPH pump but i dont think that would do.
|
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Apr 2005
Location: Chicago IL
Posts: 172
|
any one?
|
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Aug 2004
Location: Valencia (So Cal)
Posts: 757
|
there are many different ones that you could use.
i heard that the mag pumps were good, so i used it for my SCWD on my 90 G. so far so good! they're good quality
__________________
-rich Current Tank Info: 90 Gallon Mixed Reef |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Aug 2005
Location: melbourne FL USA
Posts: 350
|
I have a mag drive 9.5 with mine and it works great.It does restrict a good bit of flow.
__________________
I could quit if I wanted to. Current Tank Info: 80g mixed reef |
![]() |
![]() |
![]() |
#5 |
Premium Member
![]() Join Date: Sep 2005
Location: Cape Coral, FL
Posts: 142
|
Is it on a closed loop or a sump return? I used my on an OR2500 for sump return and it both accomplished a good amount through the SCWD and cutting down too much flow through the 20 long sump by the OR2500.
__________________
Daniel "Sweety, if I get a bigger tank, then can I have a little tang?" Current Tank Info: 40 Breeder w/ 4 x 39w T5 Retro, 20 Long Sump, Super Skimmer 65, DIY Kalkreactor |
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Oct 2002
Location: lville ga
Posts: 251
|
I run a closed loop with a mag 12 and a scwd it does a good job of breaking up the flow from 2 seio 820s i have the seios on opposite sides of the tank the back side is drilled for the scwd closed loop with the seios blowing lengthwise when the scwd alt ernates it breaks the seios flow and gets a nice random pattern the tank is a 40gal breeder 36x18x16
|
![]() |
![]() |
![]() |
|
|